PacketiX VPN 2.0 Manual  Chapter 11 Troubleshooting and Supplementary Information 11.6 Additional Compatibility Information |
11.6 Additional Compatibility Information
This section contains additional information regarding compatibility
issues when using PacketiX VPN.
- Also, SoftEther's web site (http://www.softether.com/)
may contain more up to date support information than that found in
this manual. When you are troubleshooting a problem, always remember
to check there as well.
11.6.1 Coexistence With SoftEther 1.0
PacketiX VPN Server 2.0 can coexist with SoftEther 1.0 Virtual HUBs.
However, both programs use port 443 as their listener port so you will
need to configure one of them to use a port other than port 443.
11.6.2 Relationship With Mitsubishi Materials Corporation's
SoftEther CA
PacketiX VPN 2.0 was developed from a completely different source
tree than that of SoftEther CA 1.x, which is an old version of SoftEther
1.0 that is sold by Mitsubishi Materials Corporation. SoftEther CA 1.x
is a completely separate piece of software and as such is not compatible
with PacketiX VPN 2.0 in any way.
SoftEther does not offer any support for SoftEther CA 1.x.
11.6.3 Compatibility With SoftEther 1.0 Protocols
Refer to section 「11.2.10 Performing Administration Via TELNET as Supported in
SoftEther 1.0」 for instructions on how to set up PacketiX
VPN 2.0 to be able to receive connection requests from both types of
SoftEther 1.0's VPN client software.
11.6.4 Compatibility With Other VPN Products
PacketiX VPN 2.0 has been designed so that it can be compatible with
other VPN products (software or hardware) using the PacketiX VPN
protocol that may appear in the future. Therefore, it is likely that if
this type of VPN software or hardware does appear in the future it will
be able to operate together with PacketiX VPN 2.0.
|